kug-ch06 Page 23 Thursday, March 6, 1997 4:48 PM

 

 

 

C o n t r o l P a n e l M e s s a g e s

Table 6.2 Control Panel messages (continued)

 

 

 

 

 

 

Message

 

 

Description/Corrective Action

 

 

 

 

Test Print

A Test Print is being printed (for use by service technicians).

 

Printing...

The message clears once the printing is completed.

 

 

 

 

ACTION:

None.

 

 

 

 

Toner Low

Toner is getting low in the EP (print) cartridge, but printing will continue without

 

interruption.

 

 

 

ACTION:

Replace the EP cartridge as soon as possible.

 

 

 

Tray Jam-

Paper has misfed at printer startup. The message alternates with:

Open All Trays

Open Front Cover

 

 

 

Remove Jam Sheet

 

 

 

ACTION:

See “Misfeed Jam at Startup” (page 6-32).

 

 

 

 

Turn Power Off

A fatal disk error has occurred.

 

Then On

ACTION:

Power OFF the printer, then ON.

 

 

 

 

 

Unknown Disk

The hard disk partition block cannot be understood. This is probably because a

 

new disk has been installed.

 

 

This message flashes alternately with the two-line message:

 

 

Press to Init.

 

 

Press to Abort

 

 

ACTION:

Press Up

to format the disk or press Down

to abort.

Waiting... The printer was busy processing data from a host but the print job was not completed.

This message appears until:

Another print job is received.

The Port Timeout expires and Auto Job End is On.

The last page timeout expires.

The PostScript “waittimeout” expires.

ACTION: None.

Table 6.2 Page 18 of 19

C h a p t e r 6 : T r o u b l e s h o o t i n g 6-23