kug-ch06 Page 18 Thursday, March 6, 1997 4:48 PM

C o n t r o l P a n e l M e s s a g e s

Table 6.2 Control Panel messages (continued)

Message

Description/Corrective Action

 

 

Out of Memory Current PCL job cannot print because it exceeds available memory.

Even though Auto Continue may be On, you will see the message below for ten seconds:

Press *

The printer waits ten seconds, then resumes (in effect, pressing Enter for you).

The page is ejected from the printer. Depending on the cause of the problem, your print job may continue or be ended.

ACTION: • Reduce resolution to 600 x 600 dpi.

Install additional memory.

Contact your dealer or Digital.

Page Too Complex In PCL or PostScript, the printing on a page is broken into horizontal bands. When the Page Protection option is set to Off, as a page is processed, each band has a limited time to be composed and imprinted on the page. Page Too Complex means the current page cannot print because there is not enough time to compose it.

 

ACTION:

Press Enter

. The page will be ejected and the print job will

 

 

continue. The page that was too complex may be printed on more

 

 

than one sheet of paper. To achieve correct printing, set the Page

 

 

Protection option to the appropriate page size (or to On for

 

 

PostScript) and send the print job again.

 

 

Even though Auto Continue may be On, you will see the message

 

 

below for ten seconds:

 

 

Press *

 

 

 

The printer waits ten seconds, then resumes (in effect, pressing

 

 

Enter

for you).

 

 

Paper Jam-

Paper has jammed at the EP (print) cartridge. The message alternates with:

Open Front Cover

Remove PrintCart

 

 

Clear Paper Path

 

 

ACTION:

See “Print Cartridge Jam” (page 6-31).

Table 6.2 Page 13 of 19

6-18L N 1 7 a n d L N 1 7 p s P r i n t e r s U s e r G u i d e