Clean the paper path

During the printing process, paper, toner, and dust particles can accumulate inside the product. Over time, this buildup can cause print quality problems such as toner specks or smearing. This product has a cleaning mode that can correct and prevent these types of problems.

Specks

Smearing

 

 

 

 

 

 

Clean the paper path from HP ToolboxFX

Use HP ToolboxFX to clean the paper path. This is the recommended cleaning method. If you do not have access to HP ToolboxFX, use the control panel method.

1.Make sure that the product is turned on and in the Ready state and that paper is loaded in the priority input tray or Tray 1.

2.Open HP ToolboxFX, click the product, and then click the System Settings tab.

3.Click the Service tab, and then click Start.

A page feeds through the product slowly. Discard the page when the process is complete.

Clean the paper path from the control panel

If you do not have access to HP ToolboxFX, you can print a cleaning page from the control panel.

1.Press the Setup button.

2.Use the arrow buttons to select the Service menu, and then press OK.

3.Use the arrow buttons to select Cleaning Page, and then press OK.

4.Load plain letter or A4 paper when prompted.

5.Press OK again to confirm and begin the cleaning process.

A page feeds through the product slowly. Discard the page when the process is complete.

Clean the scanner glass strip and platen

Over time, specks of debris can collect on the scanner glass and on the white plastic backing. This can affect printing performance. Use the following procedure to clean the scanner glass and the white plastic backing.

1.Use the power switch to turn off the product, and then unplug the power cord from the electrical outlet.

2.Open the scanner lid.

162 Chapter 2 Solve problems

ENWW

Page 182
Image 182
HP M1536dnf CE538ABGJ manual Clean the paper path, Clean the scanner glass strip and platen