4.Disconnect one connector (callout 1), and then release the wire harness (callout 2) from the guides (callout 3).

Figure 1-51Remove the pickup assembly (4 of 9)

3

2

1

5.Disconnect three connectors (callout 1), and then remove the wire harness (callout 2) from the guide (callout 3).

Reinstallation tip When installing the pickup assembly, place these wire harnesses (callout 2) in the guide first, and then place the wire harness from the ground connector in the previous step. This ensures that the harnesses are long enough to reach the engine controller PCA connectors.

Figure 1-52Remove the pickup assembly (5 of 9)

2

3

1

38 Chapter 1 Removal and replacement

ENWW

Page 58
Image 58
HP M1536dnf CE538ABGJ manual 52Remove the pickup assembly 5 Removal and replacement