HP M1536dnf CE538ABGJ Change error correction and fax speed, Set the fax-error-correction mode

Include the first page of each fax on the fax confirmation, fax error, and last call reports

1. On the control panel, press the Fax Menu button.

2.Use the arrow buttons to select the Fax Reports menu, and then press the OK button.

3.Use the arrow buttons to select the Include 1st page menu, and then press the OK button.

4.Use the arrow buttons to select the On option, and then press the OK button to confirm the selection.

Change error correction and fax speed

Set the fax-error-correction mode

Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If the product detects an error during the transmission and the error-correction setting is On, the product can request that the portion of the fax be resent. The factory-set default for error correction is On.

You should turn off error correction only if you are having trouble sending or receiving a fax, and you are willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection.

1.On the control panel, press the Setup button.

2.Use the arrow buttons to select the Service menu, and then press the OK button.

3.Use the arrow buttons to select the Fax Service menu, and then press the OK button.

4.Use the arrow buttons to select the Error Correction menu, and then press the OK button.

5.Use the arrow buttons to select the On or Off option, and then press the OK button to save the selection.

Change the fax speed

The fax-speed setting is the modem protocol that the product uses to send faxes. It is the worldwide standard for full-duplex modems that send and receive data across telephone lines at up to 33,600 bits per second (bps). The factory-set default for the fax-speed setting is Fast(V.34).

176 Chapter 2 Solve problems ENWW