To specify the printer to use
1In the Specify Bluetooth Printer screen, use the
2Select the COM port that was associated with the printer during the setup procedure. The default COM port is 8.
To change the Bluetooth COM port setting, go to the Configuration screen and tap the System tab.
3When you add a printer, you have to give it a name. The name should be unique and easily identifiable.
Enter the printer name in the My printer’s name box. When you tap this field, a keyboard will appear. Use the keyboard to enter the
required text, and then tap the keyboard icon 
on the command bar to remove the keyboard from the screen.
Select the following check boxes as needed:
Tap the Enable raw file type check box if you want to send an unprocessed file (such as a postscript or pdf) directly to the printer.
Tap the Set as default printer check box if you want to make the current printer your default printer.
To print a test page, tap Print Test Page.
Tap Finish to add the printer to the printer list.
ENWW | Add a printer 35 |
