HP Pro B8300 manual Printing on envelopes, For Windows, For Macintosh

Printing on envelopes

NOTE If you are printing one or just a few envelopes, you can use the front manual feed slot. See Printing with the front or rear manual feed slot.

Avoid using envelopes that have clasps or windows; have thick, irregular, or curled edges; are shiny or embossed; or are wrinkled, torn, or otherwise damaged.

1.Raise the output tray and remove any media from the input tray.

2.Insert up to 15 envelopes along the right side of the input tray, with the flaps facing up and to the right, until they stop.

3.Press the button on top of the paper width guide and slide the guide to the right until it stops at the edge of the envelopes.

4.Press the input tray lock and retract the tray until it stops at the edge of the envelopes.

5.Lower the output tray.

6.For Windows:

a.Open the printer driver (see Printing a document).

b.Click the Features tab.

c.Select the envelope size from the Size drop-down list.

d.Change any other desired print settings and click OK.

e.Print your file.

For Macintosh:

a.Click File, and then click Page Setup.

b.Select the envelope size and click OK.

56 Chapter 4 Printing and loading media ENWW