![](/images/new-backgrounds/1308168/30816879x1.webp)
Chapter 5
To set the paper type for copies from the control panel
1.In the Copy area, press Copy Menu repeatedly until Paper Type appears.
2.Press until the appropriate paper type appears.
3.Press START COPY Black or START COPY Color.
Refer to the following table to determine which paper type setting to choose based on the paper loaded in the input tray.
Paper type | Control panel setting | |
Copier paper or letterhead | Plain Paper | |
HP Bright White Paper | Plain Paper | |
HP Premium Plus Photo Paper, Glossy | Premium Photo | |
HP Premium Plus Photo Paper, Matte | Premium Photo | |
HP Premium Plus 10 x 15 cm (4 x 6 inch) Photo Paper | Premium Photo | |
HP Premium or Premium Plus Inkjet Transparency Film | Transparency | |
Other transparency film | Transparency | |
Plain Hagaki | Plain Paper | |
Glossy Hagaki | Premium Photo | |
L (Japan only) | Premium Photo | |
|
|
|
|
|
|
NOTE: Copy functions can also be performed using the HP Photosmart Software (Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help for more information.
Change copy speed or quality
The device provides three options that affect copy speed and quality:
•Best produces the highest quality for all paper and eliminates the banding (striping) effect that sometimes occurs in solid areas. Best copies slower than the other quality settings.
•Normal delivers
•Fast copies faster than the Normal setting. The text is comparable to the quality of the Normal setting, but the graphics might be lower quality. The Fast setting uses less ink and extends the life of your print cartridges.
To change the copy quality from the control panel
1.Make sure you have paper loaded in the input tray.
2.Place your original face down on the glass.
3.In the Copy area, press Quality until the appropriate quality setting is lit.
4.Press START COPY Black or START COPY Color.
36 Copy