Store printing supplies | HP Pro L7400 specs

Chapter 8

5.Before installing a printhead, shake the printhead up and down at least six times while the printhead is still in its packaging.

6.Remove the new printhead from its package, and then remove its orange protective caps.

CAUTION: Do not shake printheads after the caps are removed.

7.Insert the printhead into its color-coded slot (the label on the printhead must match the label on the printhead latch). Press down firmly on the printhead to ensure proper contact.

8.Pull the printhead latch all the way forward, and then press down to ensure that the latch is properly engaged. You might have to apply some pressure to engage the latch.

9.Close the top cover.

10.Wait while the device initializes the printheads and prints the alignment pages. If the device does not print the pages, start the alignment process manually. For more information, see Align the printheads.

Store printing supplies

This section covers the following topics:

•Store ink cartridges

•Store printheads

64 Maintain and troubleshoot

Image 68

HP Pro L7400 manual Store printing supplies

Contents

HP Officejet Pro L7400 All-in-One series Page HP Officejet Pro L7400 All-in- One series Safety information AccessibilityCopyright information Hewlett-Packard Company notices Contents Scan Configure and manageCopy Maintain and troubleshoot HP supplies and accessories Support and warranty Device specifications Regulatory information Get started Find other resources for the productResource Description Location Understand the device parts Front view Printing supplies area Label Back viewControl panel buttons and lights Connection information Description Recommended Install the accessories Install the duplexerInstall Tray To install the duplexer Turn on accessories in the print driver To install Tray Click Apply Changes To turn on accessories on Windows computersTo turn on accessories on Macintosh computers Use the device Use control panel menusControl-panel message types Status messages Change device settings Error messagesCritical error messages To change settings from the control panel Use the HP Solution Center Windows Use the HP photo and imaging software To open the HP Photosmart Software on a Windows computer Load originalsLoad an original on the scanner glass To load an original on the scanner glass Tips for selecting and using print mediaSelect print media Understand specifications for supported media Envelopes Media size TrayStandard media sizes Other media CardsPhoto media Capacity Understand supported media types and weightsTray Type Weight Paper 60 to 105 g/m2 Media Left Right Top Bottom Margin Load mediaSet minimum margins To load Tray 1 main tray To load Tray Follow these steps Configure traysWant to Print on special and custom-sized media To print a borderless document Windows Click Properties or SetupPrint borderless To print a borderless document Mac OS Open the Paper Type/Quality panel Change print settings Change default settings for all future jobs WindowsChange settings Mac OS To change the settings Print on both sides duplexing Guidelines for printing on both sides of aPerform duplexing To print manually on both sides of a page Windows To print manually on both sides of a page Mac OS To print automatically on both sides of a page WindowsTo print automatically on both sides of a page Mac OS Open the Two-Sided Printing panel Cancel a print job Change the copy settings CopyMake copies from the control panel To make a copy from the control panel Set the copy paper type Set the number of copiesSet the copy paper size Paper type Control panel setting Change copy speed or qualityTo set the paper type for copies from the control panel To change the copy quality from the control panel To resize a document from the control panel Resize an original to fit onto letter or A4 paperCopy a legal-size document onto letter paper Adjust the lightness and darkness of your copy To adjust the copy contrast from the control panelEnhance blurred areas of your copy To copy a legal-size document onto letter paper Cancel a copy job Enhance light areas of your copyTo copy a blurred document from the control panel To copy an overexposed photo from the control panel Scan Scan an original Scan from a TWAIN-compliant or a WIA-compliant program Edit a scanned originalScan from a TWAIN-compliant program Scan from a WIA-compliant program Edit a scanned photo or graphic Change scan settingsCancel a scan job Configure and manage Manage the deviceWindows Mac OS Monitor the device Administer the deviceUse device management tools Toolbox tabs Toolbox WindowsOpen the Toolbox HP Printer Utility Mac OS HP Printer Utility panels Information and Support panel Printer Settings panel HP Instant Support Understand the self-test diagnostic MyPrintMileage Understand the self-test diagnostic Configure the device Windows Direct connection Share the device on a locally shared network Connect the device before installing the softwareTo connect the device Share the device on a locally shared network Configure the device Mac OSInstall the software for a direct connection To share the device among computers running Mac OS Uninstall and reinstall the softwareTo uninstall from a Windows computer, method To uninstall from a Windows computer, method Uninstall and reinstall the software Replace the ink cartridges Maintain and troubleshootSupported ink cartridges Maintain the printheads To replace the ink cartridges Print the print quality diagnostic Check printhead health Align the printheads Clean the printheads Clean the printhead contacts manuallyTo clean the printhead contacts manually Calibrate the linefeed Maintain the printheads Chapter Replace the printheads To replace the printheads Store printing supplies Clean the device Clean the scanner glassTo clean the scanner glass Store ink cartridges Clean the exterior Troubleshooting tips and resourcesSolve printing problems Device is not responding nothing prints Error message appears on control-panel displayDevice shuts down unexpectedly Blank or partial page printed Device does not accept printheadDevice takes a long time to print Placement of the text or graphics is wrong Something on the page is missing or incorrect Check the page-orientation setting Poor print quality and unexpected printoutsDevice prints half a page, then ejects the paper Check the media size Poor quality printouts Meaningless characters print Ink is smearing Ink is not filling the text or graphics completelyOutput is faded or dull colored Colors are printing as black and white Solve paper-feed problems Wrong colors are printingPrintout shows bleeding colors Colors do not line up properly Another paper-feed problem is occurring Optional Tray 2 cannot be insertedMedia is not supported for the printer or tray Media is not picked up from a tray Solve copy problems No copy came out Copies are blank Documents are missing or fadedSize is reduced Copy quality is poor Solve scan problems Copy defects are apparent Part of the document did not scan or text is missing Scanner did nothingScan takes too long Error messages appear Text cannot be editedScanned image quality is poor Check the originals Scan defects are apparent Troubleshoot installation issues Hardware installation suggestionsSize is reduced Check the hardware connections Software installation suggestions Verify installation preliminariesCheck the computer system Check the device to ensure the following To clear a jam Clear jamsClear a jam in the device Chapter Tips for avoiding jams HP supplies and accessories AccessoriesOrder printing supplies online Supplies Printheads HP media Support and warranty Hewlett-Packard limited warranty statement Before you call Obtain electronic supportObtain HP telephone support If you have a problem, follow these steps Support processHP support by phone Phone support period Appendix B Support and warranty After the phone support period Additional warranty options Placing a call HP Quick Exchange Service Japan Call HP Korea customer support To remove ink cartridges before shipment Prepare the device for shipmentRemove the ink cartridges and printheads before shipment To remove the control-panel faceplate Remove the control-panel faceplateTo remove printheads before shipment Pack the device To pack the device Device specifications Physical specificationsProduct features and capacities Processor and memory specifications System requirements Device memoryOperating system compatibility Minimum requirements Print specifications Copy specificationsScan specifications Environmental specifications Electrical specifications Regulatory information FCC statement LED indicator statement Regulatory model number Toxic and hazardous substance table Declaration of conformity Environmental product stewardship program Appendix D Symbols/Numerics IndexPage OCR Page Twain 114