NOTE: To prevent images from being lost, feature time-outs will not occur during the sets build process.

∙PRINTER INTERRUPT - Controls how long the Printer remains in the interrupted state with no interruption at the Scanner Control Panel. This timer pertains to print jobs that have been interrupted to allow a copy job to process. The allowed range is 1 to 99 minutes. The factory default is 1 minute.

∙FILE DELETION - Specifies the maximum amount of time a scanned image file remains on the file system before being deleted. This timer pertains only to files scanned when the WIDE FORMAT COPY SYSTEM is in the READY TO SCAN mode. This timer can be set between 1 and 24 hours in increments of 1 hour. When a file is scanned in, it is given a time stamp. When the age of the file on the hard disk exceeds the value of the FILE DELETION timer, the file is automatically deleted to allow space for new files. The default value is 24 hours. After the files have been deleted, the directory will also be deleted if no other files are scanned to it.

To adjust a timer:

1.Press the Menu key. The MAIN MENU screen is displayed.

2.Press the Enter key to select CONFIGURATION. The CONFIGURATION menu screen is displayed.

3.Press the Next key until TIMERS is highlighted.

4.Press the Enter key to select TIMERS. The TIMERS screen is displayed.

TIMERSFEATURE (0 — 99) MIN 60PRINTER INTERRUPT (1 — 99 MIN): 1FILE DELETION (1-24 HR): 24
POWER SAVER

5.Press the Previous or Next key to highlight the desired timer.

6.Press the Enter key to select the highlighted timer.

7.Use the numeric keypad to enter the timer value.

8.Press the Enter key to confirm the value.

9.Repeat steps 5 through 8 if you want to set the value for additional timers.

10.Press the Exit key to return to the CONFIGURATION menu screen.

The POWER SAVER option of the CONFIGURATION menu allows you to set the number of hours of inactivity after which the system goes into Power Saver mode.

XEROX WIDE FORMAT COPY SYSTEM

Main Menu ∙ 99