TRANSFORM

MIRROR: OFF

INVERT: OFF

4.Press the Next key to highlight INVERT.

5.Press the Enter key to select INVERT.

6.Press the Previous or Next key to turn the option ON or OFF.

7.Press the Enter key to confirm your choice. The graphical display updates accordingly.

When INVERT is ON, the icon on the right side of the TRANSFORM screen is inverted. The example below shows the TRANSFORM screen with INVERT turned ON.

TRANSFORM

MIRROR OFFINVERT ON

NOTE: To cancel your choice, press the Exit key.

8.Press the Exit key to return to the READY screen.

Sample key

Copy Mode Sample:

The Sample key allows you to print a sample of a scanned image in both the COPY mode and the SCAN mode. You can then check the sample for quality or observe the results of features or copy quality adjustments before document is copied or scan to a file.

The dimensions of the sample, in the Copy mode, are the width of the page by 210 mm. The sample is taken from a point equidistant from the lead and trail edge of the image. Refer to Copy Mode below for instruction to print a sample.

In the SCAN mode the sample size is the whole document. To enable the Sample key in the SCAN Mode, the Scan-to-net feature must be installed. To enable a print sample the Scan-to-print feature key must be installed. Refer to Scan Mode Sample below for instructions to print a sample.

To print a sample of a scanned image:

1.Press the Sample key. The Sample indicator lamp illuminates. The Scanner Control Panel is placed in Printer Interrupt mode

XEROX WIDE FORMAT COPY SYSTEM

Special features keys ∙ 77