Cleaning and maintenance - Scanner

Cleaning and maintenance - Scanner

For the Scanner to do its best job, the Platen Glass, Document Drive Rolls, Backer Roll, Calibration Strip, and Document Feed Tray must be kept clean. This requires some daily and monthly cleaning and maintenance activities.

Daily activities

Clean the Platen Glass, Document Drive Rolls, and Backer Roll. See the "Cleaning the Platen Glass and Document Drive Rolls" section on the next page.

Inspect the Document Feed Tray and clean as required.

Monthly activities

Clean the Calibration Strip. See the "Cleaning the Calibration Strip" section on the next page.

Inspect the Platen Glass for chips and scratches.

If the Platen Glass is chipped or scratched, and these defects are visible in the scanned images, call XEROX service.

The following illustration depicts the Scanner components that require cleaning.

XEROX WIDE FORMAT COPY SYSTEM

Cleaning and maintenance - Scanner 137