Scanning when using a Folder
Scanning when using a Folder
When using a Folder, the document must be inserted in the correct orientaqtion in order to have the title block visible after the copy is folded. Refer to the Finisher key information in the Special feature keys section of this manual for additional information to set up the desired fold and other Finisher options. Documents larger than 80 inches (2.1M) can only be partially folded.
When using the Reduce/Enlarge feature and a Folder, you must orient and insert the document title block in the same orientation as the resulting enlargement or reduction copy size. In addition, the recommended media should be used.
For example: the job requires that an A (A4) document be enlarged to a C (A2) document. To have the title block be visible after folding, the A (A4) document must be inserted as if it were a C (A2) document.
You may want to refer to "CUSTOM R/E PRESETS" in the "Main Menu, COPY OPTIONS" section, and set up the REDUCTION/ENLARGEMENT default to show the standard reduction and enlargement. Set the reduction /enlargement to display A to C (A4 to A2) above the keys.
To ensure that the selected fold is made correctly, it is critical that the document be centered on the Scanner Document Feed Tray when scanning.
For additional folding and title block positioning information, refer to the
Folder Operator Manual or the Folding Supplement CD.
XEROX WIDE FORMAT COPY SYSTEM | Scanning when using a Folder ∙ 53 |