Recalling the Last Job

Deleting the Last Job

2.Press the Enter key to select LAST JOB. The LAST JOB menu screen is displayed. The selected option is highlighted.

LAST JOB

RECALL LAST JOBDELETE LAST JOB

3.Press the Previous or Next key to highlight the desired option.

4.Press the Enter key to select the highlighted option. The screen for the selected option is displayed.

Use the RECALL LAST JOB option to recall the information from the last job.

To recall the last job information:

1.Press the Store/Recall key. The Store/Recall menu screen is displayed.

2.Press the Enter key to select LAST JOB. The LAST JOB menu screen is displayed.

3.Press the Enter key to select RECALL LAST JOB. The screen shown below is displayed.

COPIER PARAMETERS AND IMAGESFOR LAST JOB RECALLEDPRESS ENTER TO

4.Press the Enter key to return to the READY screen.

You can now use the settings as they have been recalled, or you can change one or more of them.

NOTE: The recalled job must be printed or cleared before the next document can be scanned. If there is no last job to be restored, as is the case at power up or after the last job has been deleted, a warning message will advise you.

If, for security reasons, the parameters and images of the last job should not be left stored, use the DELETE LAST JOB option.

To delete the information from the last job:

XEROX WIDE FORMAT COPY SYSTEM

Special features keys 59