The image density on the

Rotate the original 90 degrees.

Adjust the Copy

 

copy varies from light to

 

setting for best image

 

dark.

 

quality.

 

 

 

 

 

Copies made in Photo

Set the Original, Type to Normal and the

Set Original, Type to

Try a lighter

mode have geometric

Background Suppression to Off.

Line and Background

Contrast

patterns.

 

Suppression off.

setting.

 

 

 

 

Fine lines on the original do

Enable the LINE MODE LINE

Adjust the Copy

 

not appear on the copy

PRESERVATION option. See "Imaging"

setting for best image

 

when the image size is

in the "Main Menu" section for more

quality.

 

reduced.

information.

 

 

 

 

 

 

Gray areas appear in the

Refold the document in the reverse

 

 

copy at the location of

direction to flatten the creases or folds.

 

 

creas es or folds in the

 

 

 

original document.

 

 

 

 

 

 

 

Error messages

 

 

 

 

 

 

 

An error message is

Locate the message in Table 8, "Error

 

 

displayed on the Scanner

messages," in this s ection and perform

 

 

Control Panel.

the corrective action indicated.

 

 

 

 

 

 

 

 

 

 

 

Table 8. Error Code Table
Error messageProbable causeCorrective action

 

 

 

 

 

 

40000001: ERROR

The Job Log File size has

Contact your System Administrator

ACCOUNTING DISK FULL

reached the maximum space

 

allocated for it

 

 

 

 

 

 

40000002: ERROR

The number of Job Records in

Contact your System Administrator

 

the Job Log File has reached the

 

 

maximum as defined by the

 

 

AccXES Account Management

 

 

Tool

 

 

 

 

CONTROLLER FAULT -

The Controller has developed a

Remove document. Press Start to print the

50000001

"memory is full" internal fault.

job

 

Large documents using Auto

 

 

Reduction/Enlargement or Auto-

 

 

Rotate may cause this fault.

 

 

Also, Photo and Mixed/Custom

 

 

modes require significantly more

 

 

memory than Line mode.

 

 

 

 

 

The Controller has developed a

Remove the document. Wait for previous

CONTROLLER FAULT -

“memory is full” internal fault.

scans to finish printing. End the current set

Large documents using Auto

or print it if a set is in progress. Rescan the

50000002

Reduction/Enlargement or Auto

document.

 

 

Rotate may cause this fault. Also,

 

 

Photo and Mixed/Custom modes

 

 

require significantly more memory

 

 

than Line mode.

 

 

 

 

CONTROLLER FAULT -

A task controlling the scanner

Power off the System. .

50000003

received and unrecognized

Check that all cables are connected

 

request from the task controlling

CONTROLLER FAULT -

correctly.

the scanner control panel.

50000004

Power on the System.

 

CONTROLLER FAULT -

 

 

See the "Powering off the System" and

50000005

 

 

"Powering on the System" sections for more

 

 

 

 

information.

 

 

 

 

 

 

XEROX WIDE FORMAT COPY SYSTEM

Problem solving 143