NOTE: To print a Sample in the next Step on an X2 TECH, the Scan-to- print feature key must be installed. For more information, refer to the Sample key section, Scan Mode Sample.

5.To view a sample of the file before it is scan to a file, Press the Sample key on the Control Panel. Use the Next or Previous key to highlight SCAN TO PRINTER and press the Enter key. Press the Exit key to return to the READY screen, then press Start. A copy will be sent to the printer.

6.When the Scanner Control Panel displays READY TO SCAN, select your desired scanning resolution using the Next and Previous keys.

NOTE: When making a color scan, be sure to select Color with the arrow key under Image Quality on the Scanner Control Panel. The Normal and Photo lights will be on.

7.Select the Image Quality, Original, Type by pressing the arrow button located under Type. When the Type (Normal, Line, Photo,or Color) is selected the appropriate SCAN OPTION (NORMAL, LINE, PHOTO, or COLOR) is displayed. Use the Next, Previous, and Enter keys to navigate to and through the avaliable options on the screen. Press the Enter key to confirm your choice(s). For additional information refer to the "Image Quality, Scan Mode" section of this manual.

8.Insert your original document face down and centered on the feed tray of the Scanner.

9.Gently move your document forward until the Scanner's feed rolls engage the document's leading edge.

10.If prompted to do so, enter the desired scanning width and press Enter.

11.As your document is automatically fed into the Scanner, the resulting image is stored as a file in the Scan Directory on the system Controller's hard drive. The image can be retrieved at your workstation using the Retrieve Tool of the AccXES Client Tools.

NOTE: You may have to press the Start button if the configuration (for

Auto Scan) has been changed from the factory default.

XEROX WIDE FORMAT COPY SYSTEM

Scanning to the Network (SCAN mode) ∙ 85