HP X2 Auto, Type, Type, Bond, Film, Auto, Bond, Film, Sheet, Source, Source, Source, Vellum, Vellum/Tracing

Source

The Source option allows you to select the source of the media on which the image will be printed. To select the media source, press the key beneath the Source settings until the desired source indicator lamp illuminates.

The Source settings are:

∙Sheet - This setting tells the Printer to print from a manually inserted sheet of media.

∙R4 - This setting is applicable to the WIDE FORMAT COPY SYSTEM 721P only. When it is selected on the WIDE FORMAT COPY SYSTEM 721P, both the R1 and R3 indicator lamps illuminate and the Printer selects the media stored on Roll 4.

∙R3 - This setting is applicable to the, WIDE FORMAT COPY SYSTEM, 8850, 721P, and WIDE FORMAT 510 Series (3 Drawer) only. When it is selected on those systems, the R3 indicator lamp illuminates and the Printer selects the media stored on Roll 3.

∙R2 - This setting tells the Printer to select the media stored on Roll 2.

∙R1 - This setting tells the Printer to select the media stored on Roll 1.

∙Auto (factory default) - This setting automatically selects the roll containing the media that best fits the size of the captured image. For most documents, the Scanner is able to automatically detect the width of the scanned document. This permits the Auto function to automatically select the most appropriate roll of media.

NOTE: Roll 2 and sheet feed are optional on XEROX WIDE FORMAT 8825. Roll 2 and 3 are optional on the XEROX WIDE FORMAT 510dp Series. If these options are not installed, they cannot be selected. To print from a cut sheet, Sheet mode must be explicitly selected. The Auto mode cannot select a cut sheet.

Type

The Type option allows you to select the kind of media on which to print - Bond, Vellum/Tracing, or Film. To select the media type, press the key beneath the Type settings until the desired type indicator lamp illuminates.

NOTE: Only media types actually loaded into the Printer can be selected. When a roll is selected, the media type for that roll is automatically selected also. If more than one media type is loaded when the media source is set to Auto, the default choice priority is Bond (first), Vellum (second), and Film (third). Refer to the applicable Printer Operator Manual for instructions about how to load rolls and specify the width and media type.

XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM ∙ 11