READY position at the completion of the scan. When the DOCUMENT RETURN feature is set to REAR, the Scanner delivers the document to the rear Stacker at the completion of the scan.
Some documents will always exit to the rear at the completion of the scan regardless of the DOCUMENT RETURN setting. These documents include:
∙Thick documents
∙Documents longer than 5 feet (1.52 meters)
∙Documents over 36 inches (914 mm) in width
MODE:
MANUAL
The user must enter the width of the document manually, and very carefully center the document when inserting it into the Scanner. The document is prescanned in this mode.
AUTOWIDTH
AUTOWIDTH enabled is the default setting. When AUTOWIDTH is selected, the Scanner automatically detects the width of the document.AUTOWIDTH/AUTOCENTER. The document is prescanned in this mode.
When AUTOWIDTH/AUTOCENTER is enabled, the Scanner automatically centers the image and automatically detects the document width.
PRODUCTIVITY - ANSI
PRODUCTIVITY is only available on Scanners with AccXES firmware
10.0or higher, Scanner firware 3.2.5 and the Productivity Document Feed Tray that includes discrete width sensors. PRODUCTIVITY - ANSI is the default. Other media type selections include ARCH, ISO A, ISO B, JIS B and CUSTOM. These selections must be made so that the sensors detect the correct width. This feature eliminates the prescan width measurement, which increases document throughput speed resulting in greater productivity. CUSTOM requires standard media sizes to be entered in CUSTOM MEDIA FORMATS.
AUTOWIDTH and AUTOWITH/AUTOCENTER are not available in this mode.
Reference Menu, CONFIGURATION>SCANNER CONTROL, MODE: for additional information.
48 ∙Making copies | XEROX WIDE FORMAT COPY SYSTEM |