Table 1. WIDE FORMAT COPY SYSTEM configurations

Scanner

Printer

Controller

 

 

Product Code

WIDE FORMAT SCAN SYSTEM

XEROX WIDE FORMAT 8825

N5T, EV4

WIDE FORMAT SCAN SYSTEM

XEROX WIDE FORMAT 8830

N5T, CNG

WIDE FORMAT SCAN SYSTEM

XEROX WIDE FORMAT 8850

CNG, HFT

WIDE FORMAT SCAN SYSTEM

XEROX WIDE FORMAT X2 TECH

HFT, KLF

WIDE FORMAT SCAN SYSTEM

XEROX WIDE FORMAT 510 Series

HFT, PUN

WIDE FORMAT SCAN SYSTEM

XEROX WIDE FORMAT 721P

HFT, PUN

The WIDE FORMAT COPY SYSTEM has two modes of operation - COPY and SCAN. In the COPY mode, documents are scanned, temporarily stored in memory or on the Controller hard disk, and then sent to the local Printer as soon as the Printer is available. In the SCAN mode, documents are scanned and then stored on the Controller hard disk for later retrieval over a network by a remote device. The WIDE FORMAT COPY SYSTEM allows concurrent printing, copying, and scanning to the network, so there is no need to wait for the Printer to finish before scanning the next document.

NOTE: The XEROX WIDE FORMAT X2 TECH and Synergix Digital X2

TECH Solution does not support copying at this time.

The XEROX FORMAT COPY SYSTEM contains Dynamic Background Suppression technology. Dynamic Background Suppression examines a sample of the document intelligently and makes automatic image quality adjustments that yield a good copy even from poor original documents. The document width is automatically detected and the centering of a scanned original for most opaque documents is adjusted. Translucent documents (transparencies, clear film, etc.) in most cases will not be detected.

A new Productivity feature introduced with version 10.0 firmware and requires a new WIDE FORMAT SCAN SYSTEM with a new Document Feed-in Tray. Sensors built into the Feed Tray measure the document width without doing a prescan, which increase the document and copy throughput thereby increasing productivity.

For documents that require additional adjustments to obtain the best copy quality, a variety of image quality and reduction/enlargement settings are available. All of these functions are controlled from the Scanner Control Panel. This Control Panel, which is mounted on top of the Scanner, receives all power and information from the Scanner.

2 Getting to know the WIDE FORMAT COPY SYSTEM

XEROX WIDE FORMAT COPY SYSTEM