CLEAR SCANNER FAULT LOG

CLEAN CAL ZONE

COMPONENT TESTS

The CLEAR SCANNER FAULT LOG option is for use by the Customer Service Engineer only and requires the entry of the diagnostic password. It allows the Customer Service Engineer to erase the contents of the Scanner Fault Log.

If you select this option, the CLEAR SCANNER FAULT LOG screen is displayed. You cannot perform any functions in this screen. Press the Exit key to return to the SCANNER DIAGNOSTICS menu screen.

Below is an illustration of the CLEAR SCANNER FAULT LOG screen.

CLEAR SCANNER FAULT LOG

WARNING: THIS FUNCTION

DESTROYS ALL LOG MESSAGES

EXECUTE: NO

The CLEAR CAL ZONE (Clear Calibration Zone) provides the user with a quick way to move the Calibration Motor to the cleaning position. There are two selections CLEANING POSITION AND HOME POSITION.

CLEAN CAL ZONEPOSITION: CLEANING POSITION

The COMPONENT TESTS option of the SCANNER DIAGNOSTICS menu provides a sub-menu of the following menu choices:

∙MOTOR SPEED - Enables the Customer Service Engineer to adjust the Scanner motor speed and correct magnification errors in the process direction. The diagnostic password is required for this function.

∙LEAD EDGE/TRAIL EDGE - Enables you to execute the lead edge/trail edge diagnostic.

∙SENSORS - Enables you to display the current state of the Scanner optical paper sensors and the thick document sensor.

∙MOTOR COMMUNICATIONS - Enables a document motor communications loopback test to assist in diagnosing a scanner problem.

∙DOCUMENT MOTOR - Enables you to stop and start the document handler motor.

124 ∙Main Menu

XEROX WIDE FORMAT COPY SYSTEM