TITLE BLOCK LOCATION

choices are ALWAYS ON, ALWAYS OFF, and USE PROGRAM SETTING. USE PROGRAM SETTING is the factory default setting.

CROSSFOLD OPTIONSCROSSFOLD: USE PROGRAM

The TITLE BLOCK LOCATION option enables you to specify the location of the title block for the copy jobs that are about to be run. The choices are BOTTOM RIGHT, BOTTOM LEFT, TOP RIGHT, TOP LEFT, and INTELLIGENT TITLE BLOCK. BOTTOM RIGHT is the factory default setting.

INTELLIGENT TITLE BLOCK should be used if the title block is not located in the desired location on the folded copy. This selection will use information, document size, selected fold program, title block position input to place the title block in a position based on the information. It may not be the user's desired or location. Before making this selection, check the following:

∙Autorotate is selected.

∙Document being scanned is oriented correctly for scanning.

∙Ensure the title block position specified is correct.

∙For additional help, refer to the Folding Supplement manual.

NOTE: The title block location may also be selected on the READY TO COPY screen using the title block location icon. The title block location is indicated by the dotted lines.

TITLE BLOCK LOCATIONTB LOCATION: BOTTOM RIGHT

68 ∙Special features keys

XEROX WIDE FORMAT COPY SYSTEM