Finisher menu optionsFOLD PROGRAMSOVERLENGTH OPTIONS

page for an illustration and description of each option. Also refer to the Folder User Documentation for additional information on the available folding options.

4.Press the Previous or Next key to scroll through the choices for the selected option.

5.When the desired choice is highlighted, press the Enter key to confirm your selection.

6.Repeat steps 4 and 5 if you want to change a setting for any other options.

7.Press the Exit key to return to the READY screen.

A page icon is displayed with a dotted box at one of the page corners. The dotted box indicates the title block location selection made using the Finisher menu. The title block location can be change on this screen using the Next and Previous keys.

READY TO COPY

INSERT DOCUMENT

AUTO

100.0 %1

8.To disable the finisher, press the Finisher key again. The Finisher indicator lamp is extinguished.

Below are descriptions of each of the Finisher menu options. Refer to the Finisher user documentation for additional information on these options.

The FOLD PROGRAM option enables you to select one of up to 20 user- defined programs. The program names are programmed into the finisher and passed to the Controller when the finisher goes through its power-up sequence.

FOLD PROGRAM

PROGRAM: USER PROGRAM

The OVERLENGTH OPTIONS option enables you to specify how long documents (documents over 80 inches long) are handled by the folder. The choices are NO FOLD and Z-FOLD. If NO FOLD is selected, the long document will not be folded. If Z-FOLD is selected, the long document will be Z-FOLDED, but not cross-folded. NO FOLD is the factory default setting.

66 ∙Special features keys

XEROX WIDE FORMAT COPY SYSTEM