Next

The Next key highlights the following item in a displayed list.

Enter

The Enter key either confirms the selection of the currently highlighted item or confirms an entered numeric value.

Exit

The Exit key cancels a selection operation and returns you to a previous screen. It has other effects, depending upon the specific situation, that are explained later.

Mode

The Mode key is a valid selection only when READY is displayed on the screen. This key is used to switch between the READY TO COPY mode and the READY TO SCAN mode. The SCAN mode can be entered only if the Scan to Net feature key is loaded.

Below are examples of the READY screen in COPY and SCAN modes.

NOTE: The COPY mode is disabled foe X2 TECH

READY TO COPY

INSERT DOCUMENT

AUTO

100.0%1READY TO SCAN

INSERT DOCUMENT

TIFF/CCITTG4 BIT

400 DPI

In the COPY mode, the scanned image, or set of images is printed on the Printer and then deleted from the hard disk.

In the SCAN mode, the scanned image, or set of images, is stored on the hard disk for later retrieval over a network by a client running on a remotely located device. Refer to the "Scanning to the Network" section for more information about the SCAN mode.

NOTE: The SCAN mode is an optional feature that is enabled by installing the Scan to Net feature key Contact your XEROX representative for ordering information.

22 ∙Getting to know the WIDE FORMAT COPY SYSTEM

XEROX WIDE FORMAT COPY SYSTEM