HP X2 SYSTEM, PASSWORD:, SYSTEM ADMINISTRATION, INVALID PASSWORD, RE-ENTER, JOB ACCOUNTING MODE FILE SYSTEM CHANGE PASSWORD SECURITY, FILE SYSTEM, JOB ACCOUNTING

SYSTEMJOB ACCOUNTING MODE FILE SYSTEM CHANGE PASSWORD SECURITY

JOB ACCOUNTINGFILE SYSTEM

NOTE: If an incorrect password is entered, an error message will be displayed as shown below. Enter the password again.

SYSTEM ADMINISTRATION

PASSWORD: *****INVALID PASSWORD, RE-ENTER

6.Press the Previous or Next key to scroll through the list of system administration options.

7.Press the Enter key to select the desired option.

The JOB ACCOUNTING option of the System Administration menu allows the system administrator with access to enable Job Accounting. The options are DISABLED, ENABLED, and OPTIONAL. The default is

DISABLED.

NOTE: This option will not be displayed unless the Scan to Net feature is enabled. SCAN mode is an option on the WIDE FORMAT COPY SYSTEM 8825 and 8850. If SCAN mode has not been enabled, the FILE SYSTEM information is not available. To order this feature, contact your XEROX representative.

The FILE SYSTEM option of the SYSTEM ADMINISTRATION menu provides a sub-menu of the following menu choices:

∙LIST BY DIRECTORY- Allows the system administrator to list the number of images stored under each directory and the percentage of total hard disk space consumed by the directory.

∙DELETE IMAGES - Allows the system administrator to delete all of the images scanned for a particular directory.

∙DELETE ALL IMAGES - Allows the system administrator to delete all of the images currently stored on the hard disk.

To access the FILE SYSTEM menu:

1.Access the SYSTEM ADMINISTRATION menu. See "Entering the system administration password" in this section.

2.Press the Next key to highlight FILE SYSTEM.

XEROX WIDE FORMAT COPY SYSTEM Main Menu ∙ 109