Appendix 5

File formats supported by the Controller with Firmware 10.0 are shown in the list below.

∙CalComp 906/907/PCI

∙HP-GL (HP7585/6)

∙HP-GL/2

∙TIFF 6.0

∙CGM

∙VCGL

∙VDS (VRF, Block Raster, Compressed Raster, VOF)

∙Versatec Raster/Green Sheet

∙Post Script

Appendix 6

The HFT and the KLF Controller (X2 TECH) have four LED status indicators as shown in Table 12 below.

Table 12. UP8 Controller LED status indicators

 

 

 

LED Number

Color

Indicated Condition

 

 

 

 

 

 

LED 1

Green

"Ready." Indicates that the Controller is

 

 

powered up and ready to process

 

 

incoming jobs.

 

 

 

LED 2

Green

"Busy." Indicates that the Controller is

 

 

busy processing a job.

 

 

 

LED 3

Yellow

"Mismatch." Indicates that a media

 

 

mismatch, which may be blocking the

 

 

print queue, has occurred. Also

 

 

displayed when the Controller's

 

 

Accounting disk is full, or when the

 

 

Controller has reached its Accounting

 

 

record limit. Check the Web PMT's Main

 

 

Page to determine the problem.

 

 

 

LED 4

Red

"Attention." Indicates that a Printer or

 

 

Finisher fault has occurred. May indicate

 

 

a paper jam, out of toner condition, out of

 

 

media condition, or a communications

 

 

problem with one of the devices.

 

 

 

 

 

 

During power-on self test (POST), the firmware will light LEDs 2, 3, and 4. After POST has successfully completed, LEDs 2, 3, and 4 will be switched OFF, and LED 1 will be switched ON. If POST did not successfully complete, all 4 LEDs will be switched OFF (i.e., they will be unlit).

XEROX WIDE FORMAT COPY SYSTEM

Appendices ∙ 151