1.Press the Menu key. The MAIN MENU screen is displayed.

2.Press the Next key until DIAGNOSTICS is highlighted.

3.Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is displayed.

4.Press the Next key until SCANNER DIAGNOSTICS is displayed.

5.Press the Enter key to select SCANNER DIAGNOSTICS. The SCANNER DIAGNOSTICS menu screen is displayed.

6.Press the Next key until COMPONENT TESTS is highlighted.

7.Press the Enter key to select COMPONENT TESTS. The COMPONENTS TESTS menu screen is displayed.

8.Press the Enter key to select SENSORS. Depending on the Document Feed-in Tray configuration, with or without a Productivity Tray one of the SENSORS screen shown below is displayed. The first screen below is without the Productivity Tray The status of each sensor displays as NO. INPUT, EXIT, LEFT, RIGHT, HOME and REGISTER are the optical paper sensors. THICK is the Thick Document Sensor. The second screen below is with the Productivity Tray. When a sensor is activated the icon O is filled in.

 

SENSORS

 

INPUT: NOEXIT: NOHOME: NO
LEFT: NO

 

RIGHT: NO
REGISTER: NO

 

THICK: NO

 

 

 

EXIT: O

SENSORS

 

THICK: OHOME: O
INPUT: O

 

REGISTER: O

 

 

O O O

O O O

O O O O

 

 

 

9. To check the status of the optical paper sensors:

a)Raise the Thickness Lever to enable an 8.5 X 11 sheet of paper to be inserted into the Scanner.

b)Insert the sheet of paper centered on the Scanner and slowly push the paper into the Scanner to check the INPUT, REGISTER, and EXIT sensors.

The sensors are located underneath the top cover. The photo below shows the location of each of the sensors on the Document Feed Tray.

XEROX WIDE FORMAT COPY SYSTEM

Main Menu ∙ 127