To adjust the power saver:

1.Press the Menu key. The MAIN MENU screen is displayed.

2.Press the Enter key to select CONFIGURATION. The CONFIGURATION menu screen is displayed.

3.Press the Next key until POWER SAVER is highlighted.

4.Press the Enter key to select POWER SAVER. The POWER SAVER screen is displayed.

POWER SAVERPOWER SAVER DELAY (0 − 4 HR): 3

5. Use the numeric keypad to enter the power saver value. The valid value range is 0 to 4 hours. The factory default is 3 hours.

6. Press the Enter key to confirm the value.

7. Press the Exit key to return to the CONFIGURATION menu screen.

SCANNER CONTROL

The SCANNER CONTROL option of the CONFIGURATION menu allows

 

you to set the options for how the Scanner starts and finishes a scan. It

 

contains the following features:

∙ AUTOSCAN - Tells the Scanner either to start the scan automatically when the document is inserted (ENABLED), or to wait until the Start key is pressed (DISABLED). ENABLED is the factory default setting.

∙ DOCUMENT RETURN - Tells the Scanner, after the scan, either to return the document to the front of the Scanner (FRONT), or to drop the document from the rear of the Scanner into the catch tray (REAR). REAR is the factory default setting.

NOTE: Refer to Controlling the Scan for additional information.

∙ MODE:

∙ MANUAL WIDTH - The user must enter the document width and very carefully center the document. In this mode the document will be prescanned.

∙ AUTOWIDTH - Enables the automatic detection of the width of the document. . In this mode the document will be prescanned.

∙ AUTOWIDTH/AUTOCENTER - Enables the automatic centering of the image and automatic width detection. This selection is the default. . In this mode the document will be prescanned.

∙ PRODUCTIVITY:. This feature does not use AUTOCENTER requiring the operator to manually align the document within

100 ∙Main Menu

XEROX WIDE FORMAT COPY SYSTEM