Output Format

The Output Format option allows you to select the size to which the roll feed media will be cut. It has three modes - Manual, Preset, and Synchro.

Manual

Manual allows you to enter the desired length and width manually.

To select the Manual mode:

1.Press the key beneath Output Format until the Manual indicator lamp illuminates. The CUSTOM OUTPUT FORMAT screen is displayed.

NOTE: If the indicator lamp is already lit, press the key once to display the screen.

CUSTOM OUTPUT FORMAT
ENTER CUSTOM MEDIA SIZE:

 

 

11.0 IN
WIDTH (11.0 -36.0):
LENGTH (8.3 – 1200.0):8.5 IN

2.Press the Previous or Next key to select WIDTH or LENGTH.

3.Press the Enter key to confirm the choice.

4.Use the numeric keypad to enter the desired value.

NOTE: The entered value must be within the limits shown in parentheses on the screen.

5.Press the Enter key to confirm the value.

6.Repeat steps 3 to 5 to enter the value for the remaining setting.

7.When the values for WIDTH and LENGTH are correct, press the Exit key to return to the READY screen.

Preset

Preset allows you to select a predefined length to which the roll media should be cut during printing. The associated width specification will depend on the Media Source selection. If the Media Source selection is set to Auto, the system will select the roll of media that best matches the width specification. If Media Source is set to R1, R2, R3, or R4; the system will use the selected roll regardless of the width specification.

To select the Preset mode:

1.Press the key beneath Output Format until the Preset indicator lamp illuminates. The PRESET OUTPUT FORMAT screen is displayed.

NOTE: If the indicator lamp is already lit, press the key once to display the screen.

12 ∙Getting to know the WIDE FORMAT COPY SYSTEM

XEROX WIDE FORMAT COPY SYSTEM