HP X2 100.0 %, READY TO COPY, INSERT DOCUMENT, Scanner Warm-up, Switching on the Printer and the Controller (X2 TECH)

Switching on the Printer and the Controller (X2 TECH)Scanner Warm-up

NOTE: Ensure that the Scanner is switched on first and the P is displayed in the Status Indicator window before powering on the Controller.

The KLF Controller and the X2 TECH printer each have their own power switch. When powering them on, first power on the printer, then the scanner, wait for the P to be displayed, then power on the Controller.

The Scanner requires about 45 seconds to warm up and initialize after you power on the WIDE FORMAT COPY SYSTEM. Once the initialization is complete, the READY screen is displayed. Below is an example of the READY screen.

READY TO COPY

INSERT DOCUMENT

AUTO

100.0 % 1

You can now insert a document into the Document Feed Tray of the Scanner. The Scanner will then transport the document to the starting position. This transportation of the document is called staging.

If you cannot insert a document into the feed mechanism and achieve staging after approximately 4 minutes, refer to the "Problem solving" section of this guide.

XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM ∙ 29