Chapter 3. Command Reference

show high-availability

The show high-availabilitycommand shows the status of failover high availability: active, disabled, or standby.

show interface

The show interface command shows port type and status information. Use show interface without any options to show all ports. Use the ethernet, mgmtEthernet, or vnam options to show types of ports or individual ports.

ethernet [-details] [slot port]

shows interface information for all Ethernet ports, all Ethernet ports in one slot, or a single Ethernet port.

mgmtEthernet [-details]

shows interface information about the Management Ethernet port.

virtual [ [-detailsid] [ gre external internal ] ] shows information about a virtual interface.

show status of Use show interface with no parameters to show status information for all interfaces. all interfaces

hostname# show int

1/1

Slot/Port

Type

Ethernet

Internet Address

192.168.65.14

Subnet Mask

255.255.255.0

MAC Address

00:80:42:11:9E:BC

MTU

1500

Link

up(1)

Speed

100

RX Unicast Pkts

941

RX Non-Unicast Pkts

3843

RX Error Pkts

0

RX Discards

0

RX Unknown Protocols

0

RX Total Pkts

4784

TX Unicast Pkts

1384

TX Non-Unicast Pkts

2

TX Total Pkts

1386

Slot/Port

7/1

Type

Ethernet

MTU

1500

Link

up(1)

Speed

1000

Duplex

Full(3)

RX Unicast Pkts

10

RX Multicast Pkts

0

RX Broadcast Pkts

385

RX Error Pkts

0

RX Discards

0

RX Unknown Protocols

0

RX Total Pkts

395

96 X Family CLI Reference V 2.5.1