1 X Family Startup

Configuration

The X family device is a high-speed, comprehensive security system. This section describes the steps required to start managing the X family device.

Overview

You must complete basic configuration of the X family device to pass traffic in the default configuration. The X Family Setup Wizard provides a convenient way for you to enter the necessary configuration data when you install a new device on your network, or when you move or reconfigure a device within your network. Refer to the following documents for hardware installation:

•Quick Start Guide

•Hardware Installation and Safety Guide

For the most recent updates, check the Threat Management Center (TMC) website. The Customer Support phone number is 1-866-681-8324.

Initial Configuration

You can perform initial configuration on the X family device with OBE Setup Wizard or with the CLI Setup Wizard.

The OBE Setup Wizard

The OBE Setup Wizard runs when you first connect to the device through the Local Security Manager (LSM) with your web browser. The LSM is a web-based GUI for managing one X family device. The

X Family CLI Reference V 2.5.1

1