debug

debug

access: super user

Most debug commands should only be used when you are instructed to do so by technical support, but some commands can be useful in managing the device.

factory-reset

The debug factory-resetcommand returns the device to its factory defaults.

CAUTION: Use this command only when instructed to do so by technical support.

log syslog

The debug log syslog command is used to review syslog server settings.

audit ip

reviews the settings of the audit log on the syslog server. Specify the IP address of the server that you want to review.

systemlog ip

reviews the settings of the system log on the syslog server. Specify the IP address of the server.

exit

access: global; all

The exit command backs you out of one level of submenu or, if you use exit all, backs you out of all submenus. For more information about sub-menus and local commands, see Chapter 4‚ “Navigation”.

 

Using exit

back out of

Use exit to back out of one submenu. In this example, the user moves from the cfg-serverlevel to the

one menu

config level:

level

 

 

hostname(cfg-svr)# exit

 

hostname(config)#

back out of all

Use exit all back out of all submenus.

submenus

 

 

hostname(cfg-svr)# exit all

X Family CLI Reference V 2.5.1

81