Chapter 3. Command Reference

Using the boot command

view available Enter boot list-imageto list all available boot images. boot images

hostname# boot list-image image1 image2 image3

remove a boot image from the device’s hard disk

roll back to the next most current image

Enter boot remove-imageimage-nameto remove a boot image from the device.

hostname# boot remove-image image2

Enter boot rollback to roll back to a previous boot image.

hostname# boot rollback

bugreport

access: local; super, admin, operator

The bugreport command polls the device for statistics and other relevant information and sends the information as

aclear-text e-mail message to the specified e-mail address. You should only execute this command when requested by support personnel.

The command may take a minute to execute. The default e-mail options must be configured for the e-mail transfer to succeed. This can be accomplished using the setup email-defaultcommand.

CAUTION: Since this information is transferred via e-mail, it is transferred on an unsecured channel in clear text. While we do not consider the system snapshot information to constitute a security risk, you may choose to report system problems by other methods. If so, please contact the Technical Assistance Center (TAC) to make other arrangements.

email-address

the email address of your designated bug report recipient. This must be a valid email user name on the email notification server.

"description"

a short description (in double quotes) of the bug that the user is experiencing.

30 X Family CLI Reference V 2.5.1