configure

zone < add remove > zone-name

adds a security zone to (or removes it from) this virtual interface.

gre id

Configures a GRE interface.

igmp [enable disable] [ query-interval secs] [query-timeout secs] [max-query-time secs]

Enables and configures IGMP.

local-ip ip-local

Configures the IP Address of the tunnel. Choose an unused IP address that is routable through your network

peer-ip ip

configures the IP address of the tunnel on the remote device.

pim-dm < enable disable > enables PIM-DM.

remote-endpoint-ip remote-ip-address

configures the IP address of the remote device (the tunnel endpoint) when GRE is not secured by IPSec SA.

rip < enable disable >

enables or disables RIP on this interface.

rip advertise-routes < enable disable >

enables or disables the advertisement of RIP routes on this interface.

rip auth < disable simple key md5 key > configures RIP v2 authentication type.

rip poison-reverse < enable disable > enables poison reverse.

rip receive-mode < disable v1 v2 all > configures the RIP receive-mode.

rip send-mode < disable v1 v2-broadcast v2-multicast > configures the RIP send-mode.

rip split-horizon < enable disable > enables split horizon.

sa sa_name

configures the IPSec Security Association that the GRE interface will use.

X Family CLI Reference V 2.5.1

53