Chapter 1. X Family Startup Configuration

Enable the SNMP agent ('No' disables SMS and NMS access)? [Yes]:y

SSH: Yes

HTTPS: Yes

HTTP: No

SNMP: Yes

Enter [A]ccept, [C]hange, or [E]xit without saving [C]: e

NMS Settings

The NMS Options dialog configures the Network Monitoring System (NMS) settings available for the device. This feature enables monitoring of the device by an NMS, such as HP OpenView.

Example

The NMS Options dialog follows:

A Network Management System (NMS) such as HP OpenView (TM) can be used to monitor and receive traps from your device.

Would you like to configure a Network Management System? <Y,[N]>: y

Restrict SMS

This option configures the device to accept management only from an SMS at a specified IP address.

Example

The Restricted SMS Access dialog follows:

SMS sourced configuration allows the device to retrieve the configuration for a secure management VPN to the SMS system. This will ensure that the device can be managed securely from the SMS

Would you like to enable SMS based configuration? <Y,[N]>:n

Additional Configuration

After you have run the initial setup wizard through the Command Line Interface via a serial terminal, you can further configure the device. These subsequent setup options include the following:

•“Changing Network Deployment Configuration” on page 16

•“Ethernet Port Settings” on page 17

•“Default Email Contact Information” on page 18

Changing Network Deployment Configuration

Use the setup x-seriescommand to change network deployment options. Depending on the options that you select, you may also be required to change your virtual interface configuration.

16X Family CLI Reference V 2.5.1