configure

oam no oam

enables or disables gathering of OAM information.

policy no policy

enables or disables gathering of policy information.

report no report

enables or disables gathering of report information.

segment no segment

enables or disables gathering of segment information, such as port and system settings per segment of a device.

server no server

enables or disables gathering of server information.

sms no sms

enables or disables gathering of SMS information.

time no time

enables or disables gathering of system time information.

tse no tse

senables or disables gathering of information about the Threat Suppression Engine.

update no update

enables or disables gathering of information about system and software updates, such as Digital Vaccine and software updates.

user no user

enables or disables gathering of information about the user, such as account information and access capabilities.

conf t monitor

< enable disable > power-supply

enables or disables monitoring of the power supply. If any of the power supplies for an IPS device are interrupted, the power supply monitor feature logs a critical message in the system log and sends a notification to the SMS if the device is under SMS management. This feature is available on the following models: 200,400,1200,2400 and 600E, 1200E, 2400E, 5000E.

threshold

The configure terminal monitor command enables you to set hardware monitoring thresholds for IPS disk usage, memory, and temperature values. Threshold values represent a percentage and should be between 60-100. Temperature values are displayed as degrees Celsius. When setting thresholds, the major threshold must be set at a value less than the critical threshold value. A major threshold should be set to a value to give you time to react

X Family CLI Reference V 2.5.1

57