Chapter 3. Command Reference
| now |
| instructs the device to reboot immediately. |
|
|
| Using reboot |
reboot the | Use the reboot to reboot the system. You will be asked to confirm the command. Enter Y to proceed |
device | with the reboot, enter N to cancel the reboot. |
| hostname# reboot |
| Are you sure you want to reboot the system? <Y,[N]>: Y |
| Broadcast message from kscanlon |
| Rebooting local processor in 5 seconds... |
|
|
|
|
access: local; super, admin (time for super only)
The setup command invokes setup wizards for default email, Ethernet port, NMS, Web/CLI/SNMP servers, restricted SMS, and time settings. If you use the setup command without any parameters, it will execute all of the wizards. For detailed information on the setup command and wizards, see Chapter 1‚ “X Family Startup Configuration”.
showaccess: local; all (except log audit), log audit - super
The show command displays current system configuration, status, and statistics.
Note: There are two important forms of the show command, which offer different information:
•show retrieves information from the component itself and provides the current status of a device hardware or software component.
•show configuration retrieves information from the configuration files and provides the current entries in the device configuration files.
86 X Family CLI Reference V 2.5.1