Chapter 3. Command Reference

alg

shows the application layer gateway (ALG).

alg sip

show the Session Initiation Protocol (SIP) sessions.

rule [id] [from src] [to dst]

shows firewall rules. Enter a rule ID to display a single rule. The value of src or dst can be “this-device” to indicate the local device.

schedule

shows firewall schedules.

service

shows firewall services.

service-group

shows firewall service groups.

virtual-servers

shows firewall virtual servers.

high-availability

shows the configuration for the transparent high-availability. Can be changed with conf t high-availability.

host

shows the host name and host location.

interface

shows configuration of all ports if no further qualifiers (port type, slot number, port number) are entered. To view the settings for the interface configuration, enter show conf int settings. Can be changed with conf t interface.

TIP You can use the abbreviation show conf int. Also, you can define an alias using the alias command.

ethernet [slot port]

shows Ethernet port information. The command abbreviation is show conf int eth. Use the command without parameters to show the status of all Ethernet ports. Use with a slot number and port number, separated by spaces, to view the status of a single port.

mgmtEthernet

shows Management Ethernet port information. The command abbreviation is show conf int mgmt.

90 X Family CLI Reference V 2.5.1