quarantine

quarantine

access: global; all

The quarantine command displays a list of quarantined hosts, and is used to add hosts to or remove hosts from from the list.

add ip "action-set"

adds a device to the list of quarantined devices.

empty

removes all devices from quarantine.

list [filter ip]

lists all devices that are quarantined, or those quarantined within a particular range of IP addresses that you specify using filter.

remove ip

removes the device at the specified IP address from quarantine.

quit

access: global; all

The quit command logs you out of the CLI. After the command is executed, a Login prompt is displayed.

Using quit

log out of the Use quit to log out of the CLI.

CLI

hostname# quit Login:

reboot

access: local; super, admin

The reboot command reboots the system software. If you use reboot without any parameters, the device will initiate the reboot in 5 seconds.

seconds

instructs the device to begin the reboot process in from 0 to 3600 seconds.

X Family CLI Reference V 2.5.1

85