show

show np

Use show np xslcounters values to view the network processor xslcounter values.

xslcounters

 

 

 

 

 

values

hostname# show np xslcounters values

activeCount

 

Slot

timestamp

synCount

estCount

 

----

----------

----------

----------

-----------

 

3

5946554

0

0

0

show ntp

Use show ntp to view the current NTP status. You must use this command with one of the following subcommands.

sessions

displays information about the current NTP session.

status

displays the current clock and NTP status.

Using show ntp

show current To show the current NTP settings, use the show ntp status command. For example: ntp settings

hostname# show ntp status clock status: Synchronized clock stratum: 4

reference clock ID: 10.0.1.100

root delay: 0.0032

root dispersion: 8.0194

clock precision: 2^-6

NTP reference clock: 16:59:33.396 UTC Feb 19 2007 (45D9D775.17A2FD88)

Current system time: 16:59:33.399 UTC Feb 19 2007 (45D9D775.17D07E3F)

show policy counters

shows the Total, Invalid, Alerted, and Blocked counters

Note: Packet counters provide a snapshot look at traffic through your network. Counters are not synchronized with each other, and packets may be counted more than once in some situations.

show profile profile-name

The show profile command displays the policies, security zone pairs, category settings, and protection limits defined for the named profile.

show protection-settings

The show protection-settingscommand displays the configured exceptions and apply-only rules restrictions for Application Protection, Infrastructure Protection, and Performance Protection filters.

X Family CLI Reference V 2.5.1

111