Chapter 3. Command Reference

-status < PASS FAIL >

displays only records with pass or fail status.

-ip ip

displays log records reflecting access from the specified IP address

[WEB,CLI, SNMP, OTHER]

displays records based on the interface through which the device was accessed.

block

displays block log entries. Block log entries include date/time, policy name, vulnerability filter name, service, source address, and destination address information about network traffic that has triggered and been blocked by filters.

-modulemodule-name

displays records according to the module name. Refer to the log entries for module names.

firewallblock

displays a log of all firewall block actions.

-modulemodule-name

displays records according to the module name. Refer to the log entries for module names.

-loglevel [ CRIT ERR WARN INFO OTHER ] displays records according to the log level.

firewallsession

displays a log of all firewall sessions.

-modulemodule-name

displays records according to the module name. Refer to the log entries for module names.

-loglevel [ CRIT ERR WARN INFO OTHER ] displays records according to the log level.

system

displays entries from the system log. System log entries show the date, time, entry severity, entry author component, and log message.

-modulemodule-name

displays records according to the module name. Refer to the log entries for module names.

-loglevel [ CRIT ERR WARN INFO OTHER ]

displays records according to the log level.

100 X Family CLI Reference V 2.5.1