Chapter 1. X Family Startup Configuration

LSM provides HTTP and HTTPS (secure management) access. This access requires one of the following browsers:

•Microsoft Internet Explorer 6.0 or later

•Firefox 1.5 or later

•Mozilla 1.7 or later

•Netscape 8.1 or later

Using the LSM, you have a graphical display for reviewing, searching, and modifying settings. The GUI interface also provides graphical reports for monitoring the device traffic, triggered filters, and packet statistics.

For more information about using the OBE Setup Wizard to configure the device, refer to the Quick Start Guide for the X family device model. For more information about the LSM, refer to the Local Security Manager User’s Guide.

The CLI Setup Wizard

The Setup Wizard runs automatically on a console via a serial port connection when you first boot the X family device. You can also run the setup wizard from the Command Line Interface (CLI) at any time by entering the setup command.

This chapter describes the initial configuration process with the CLI Setup Wizard.

Configuration Categories

The CLI Setup Wizard runs a series of short interactive dialogs to set several basic configuration variables on the X family device. The Out-of-the-Box Terminal Setup Wizard runs when the setup wizard is activated for the first time or at another time with the setup command. This wizard is run on a serial port connected system, such as a workstation and laptop.

After you run the setup wizard using a serial terminal, you can further configure the device using subsequent setup commands through the CLI. See “Additional Configuration” on page 16 for details.

The Out-of-the-Box Setup Wizard runs on a workstation or laptop connected to the serial port of the device. The configuration dialogs are shown in the following table:

Table 1–1: Out-of-the-Box Terminal Setup Wizard Configuration Settings

Out-of-the-Box Setup

Subsequent Setups

Settings

 

 

 

 

 

 

Account Security Level

—

account security level

 

 

 

Super-user Data

—

super-user login name

 

 

super-user password

 

 

 

2X Family CLI Reference V 2.5.1