Chapter 3. Command Reference

show status of

amgmt Ethernet port

Use show interface mgmtEthernet to show the status of the Management Ethernet port.

hostname# show int mgmt

1/1

Slot/Port

Type

Ethernet

Internet Address

192.168.65.14

Subnet Mask

255.255.255.0

MAC Address

00:80:42:11:9E:BC

MTU

1500

Link

up(1)

Speed

100

RX Unicast Pkts

941

RX Non-Unicast Pkts

3844

RX Error Pkts

0

RX Discards

0

RX Unknown Protocols

0

RX Total Pkts

4785

TX Unicast Pkts

1384

TX Non-Unicast Pkts

2

TX Total Pkts

1386

show local-user

The show local-usercommand lists the local users that are defined on the device and the privilege groups to which they are assigned.

 

sessions

 

 

 

 

lists local user sessions.

 

 

show local

Use show local-userto show local users and their privilege groups.

 

users

 

 

 

 

 

hostname# show local-user

 

 

 

Name

Privilege Group

 

 

-------------------------------- --------------------------------

 

bar

Allow_VPN_access

 

 

foo

Allow_VPN_access

 

show local

Use show local-user sessions to show local users, their privilege groups, and their sessions.

user sessions

 

 

 

 

 

hostname# show local-user sessions

 

 

 

Name

Privilege Group

IP Address

Logged In

 

--------------------

--------------------

----------------

----------

 

test

RADIUS

192.204.181.137

00:15:40

show log

The show log command shows log file listings from the audit, fault, policy, peer-to-peer, and system logs. You must provide a log name when you use the show log command.

Note: When you view the audit log, the user listed for the logged events may include SMS, LSM, and CLI. The audit log displays both who performed an action (user name) and where they logged in from (such as WEB and CLI.). The audit log is the only log that displays this information.

98 X Family CLI Reference V 2.5.1