Host Configuration
Example
In this example, the password is presented in italics. In the actual dialog, the password would not be visible.
Please enter a user name that we will use to create your super- user account. Spaces are not allowed.
Name: superuser
Do you wish to accept [superuser] <Y,[N]>:Y
Please enter your
Verify password:
Saving information...Done
Your
You may continue initial configuration by logging into your device. After logging in, you will be asked for additional information.
Host Configuration
The Host Configuration dialog configures the host name and host location. You also have the option to configure the host management port.
CAUTION: Do not configure the host management port unless you have been specifically instructed to do so by technical support.
Example
In this example, the host management port is not configured, and the host name is set as device11 in the location lab.
The host management port is used to configure and monitor this device via a network connection (e.g., a web browser).
Have you been directed by technical support to configure the management port? <Y,[N]>:N
Enter Host Name [myhostname]: device11
Enter Host Location [room/rack]: lab
Host Name: device11
Host Location: lab
Enter [A]ccept, [C]hange, or [E]xit without saving [C]: A
Timekeeping Options
The Timekeeping Options dialog configures the X family device clock. You can configure the following options.
X Family CLI Reference V 2.5.1 | 7 |
|
|