Navigation
Command Hints
On each command level, you can view the hierarchical commands available at that level by typing a question mark (?). For example, when you are at the top level of the CLI:
hostname# ?
Table
Command | Description |
|
|
|
|
boot | Configures the OS image with which you want to boot. |
|
|
bugreport | Sends bug report email to designated destination |
|
|
configure | Configures hardware and software parameters. |
|
|
halt | Halts system. Places the X family device into a state where it |
| can be safely powered off. |
|
|
reboot | Reboots system. |
|
|
setup | Starts running setup wizards. |
|
|
show | Shows system configuration, status, or statistics. |
|
|
snapshot | Manages snapshots of the system. |
|
|
You can also enter the command help commands to show all the global commands that are available.
Command Completion
The CLI attempts to match partially typed commands with valid commands. For example, if you type:
hostname# bo?
The CLI interprets this command as if you typed the following:
hostname# boot
Note: You can also use the Tab key for command completion.
X Family CLI Reference V 2.5.1 | 125 |
|
|