3 Configuring Your Environment with Modulefiles

The HP XC system supports the use of Modules software to make it easier to configure and modify the your environment. Modules software enables dynamic modification of your environment by the use of modulefiles.

This chapter addresses the following topics:

•“Overview of Modules” (page 33)•“Supplied Modulefiles” (page 34)•“Modulefiles Automatically Loaded on the System” (page 36)•“Viewing Available Modulefiles” (page 36)•“Viewing Loaded Modulefiles” (page 36)•“Loading a Modulefile” (page 36)•“Unloading a Modulefile” (page 37)•“Viewing Modulefile-Specific Help” (page 37)•“Modulefile Conflicts” (page 37)•“Creating a Modulefile” (page 38)

3.1Overview of Modules

A modulefile contains information to configure the shell for an application. Typically, a modulefile contains instructions that alter or set shell environment variables, such as PATH and MANPATH, to enable access to various installed software.

Modules enable multiple versions of the same software to be used in your environment in a controlled manner. For example, two different versions of the Intel C compiler can be installed on the system at the same time – the version used is based upon which Intel C compiler modulefile is loaded.

The HP XC software provides a number of modulefiles. You can also create your own modulefiles. Modulefiles can be shared by many users on a system, and users can have their own collections of modulefiles to supplement or replace the shared modulefiles.

For further information about the Modules software supplied with the HP XC system, see the Modules Web site at the following URL:

http://sourceforge.net/projects/modules/

A modulefile does not provide configuration of your environment until it is explicitly loaded. That is, the specific modulefile for a software product or application must be loaded in your environment (with the module load command) before the configuration information in the modulefile is effective.

You or your system administrator can configure your environment so that any desired modulefiles are automatically loaded for you when you log in to the system. You can also load a modulefile yourself, as described in “Loading a Modulefile” (page 36).

The Modules software is initialized when you log in to the HP XC system. It provides access to the commands that you can use to display information about modulefiles, load or unload modulefiles, or view a list of available modulefiles.

Modulefiles do not affect packages other than their intended package. For example, a modulefile for a compiler will not adjust MPI_CC (the environment variable used by HP-MPI to control which compiler to use). A modulefile for a compiler simply makes it easier to access that particular compiler; it does not try to determine how the compiler will be used.

Similarly, a modulefile for HP-MPI will not try to adjust LD_LIBRARY_PATH to correspond to the compiler that the mpicc command uses. The modulefile for MPI simply makes it easier to

3.1 Overview of Modules 33