User Manual | 3 Getting Started with |
Aolynk DR811/DR814 ADSL2+Broadband Router | the Web Pages |
3 Getting Started with the Web Pages
The ADSL router provides a series of web pages that function as an interface for managing the device. These web pages enable you to configure the device to meet the needs of your network. You can access them through your web browser from any PC connected to the device via the LAN or USB port.
3.1 Accessing the Web Pages
To access the web pages, you need the following:
•
•
A PC or laptop connected to the LAN or USB port on the device.
A web browser installed on the PC. The minimum browser version requirement is Internet Explorer v5.0 or Netscape v4. For the best display quality, use Internet Explorer v6, or Netscape v6.1.
1. The default IP settings for the ADSL router are as follows:
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Before performing the above configurations on the ADSL router, first have the computer set in the same subnet with the router. To do so, first install and enable the TCP/IP protocol (refer to 5.1 Configuring Ethernet PCs), and then set an IP address and a subnet mask, for example, 192.168.1.100 and 255.255.255.0. Make sure the IP settings place the computer in the same subnet as the router.
2.If the browser software on the computer you are using is configured to use a proxy server for Internet access, it is necessary to first disable the proxy connection.
In Windows Internet Explorer, you can check if a proxy server is enabled using the following procedure:
•In the Explorer Window, select and click on
9
