Password, Remote Access | Huawei Aolynk DR814, Aolynk DR811 instruction

User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router	4 Web-based Management

4.14 Password

You can restrict access to your device’s web pages using password protection. With password protection enabled, users must enter a username and a password before gaining access to the web pages.

By default, the username and password are set as follows:

Username: admin

Password: admin

For more information, refer to 3 Getting Started with the Web Pages.

&Note:

For the default user ID admin, only the password can be changed.

Non-authorized users may try to guess your username and password. They will find it easier to guess the default username and password than to guess your own unique username and password. We recommend that you change the default password to your own unique setting.

Click Device in the Main menu and choose the Password tab in the Main Frame to open the password configuration page.

Figure 4-29Modify password

This page allows you to:

•Change the password of the default user: admin.

To change the password, enter the new password, and then click the button.

4.15 Remote Access

Click Device in the Main menu and choose the Remote tab in the Main Frame to open the remote administration configuration page.

This page allows you to:

38

Image 41

Huawei Aolynk DR814, Aolynk DR811 user manual Password, Remote Access

Contents

Huawei Aolynk DR811/DR814 ADSL2+Broadband Router All Rights Reserved Trademarks Table of Contents IP Addresses, Network Masks, and Subnets Model Difference IntroductionsProduct Overview Status Description AppearanceFront View Rear View FeaturesInterface Quantity Connector Description Interface Quantity Parts Check Steps Connecting Your DeviceOverview Finish Getting Started with the Web Pages Accessing the Web Pages LAN Settings button Web Page Layout Button Function Commonly Used Buttons Behavior Testing Your Setup Enabled with Default Device SettingsOption Default Setting Explanation/Instruction Web-based Management Quick Setup Open the WAN Connection Configuration WAN Setting WAN setting DNS Relay DNS relay LAN Setting LAN setting Dhcp Route Aolynk DR811/DR814 ADSL2+Broadband Router 12Create routes Security Interface Labeled Enabled/Disabled Aolynk DR811/DR814 ADSL2+Broadband Router DMZ Configuration 19Add a security interface Security Policy Definition Trigger 24 Add trigger Aolynk DR811/DR814 ADSL2+Broadband Router 25Delete trigger Click the button to delete this trigger 11 IDS Sntp 26 IDS setting Zipb 27 Sntp setting 28 Zipb setting Remote Access Password 32 Restart Restart Router Configuration Backup/Restore Aolynk DR811/DR814 ADSL2+Broadband Router 37Restore configuration Upgrade Status 39 Status 20 Log 41 Log PVC Scan Save Configure Configuring Ethernet PCs Configuring Your ComputersBefore You Begin Windows XP PCs Windows 2000 PCs Windows 95, 98 PCs Windows Me PCs Windows NT 4.0 Workstations Assigning Static Internet Information to Your PCs Installing the USB Driver Configuring a PC Connected by USB PortConnecting a Computer to the USB Port by a USB cable 2Found new hardware New hardware installed and ready to use Configuring IP Properties on PC Connected by USB Port Structure of an IP Address IP Addresses, Network Masks, and SubnetsIP Addresses Class Field1 Field2 Field3 Field4 Subnet MasksNetwork Classes Aolynk DR811/DR814 ADSL2+Broadband Router Configuration Overview Service Configuration ConnectionPureBridge PureBridge IPoA DHCP/StaticIP PPPoE PPPoA PPPoE Problem Troubleshooting Suggestion TroubleshootingTroubleshooting Suggestions To see if the Adsl line is connected correctly Ping Diagnosing Problem Using IP UtilitiesPing Nslookup Nslookup Appendix Glossary Domain Dhcp serverName Download Hub HostInternet Intranet Packet Network Network maskPort Protocol Remote RJ-11 Routing RJ-45Subnet Subnet mask Web site Web browserWeb