4. Ensurethat both Client for Microsoft Networks and Internet Protocol (TCP/IP) are installed and checked in the Local
Area Connection properties dialog as shown in Figure 36: Local AreaConnection Properties Dialog – Windows
2000 on page 52.
Figure 48: Local Area Connection Properties Dialog – Windows 2000
5. If NetBEUI is installed and checked, uncheck it or uninstall it.
6. Highlight Internet Protocol (TCP/IP). Be careful not to uncheck the checkbox.
7. Click Properties.
The Internet Protocol Properties dialog appears as shown in Figure 37: Internet ProtocolProperties – Windows
2000 on page 52.
Figure 49: Internet Protocol Properties – Windows 2000
8. On the General tab, select Use the following IP address.
9. Enter the IP address and Subnet mask.
If you do not know what public IP address or range of addresses is available for use, see Understanding the modem
address and computer address on page 38.
10. Enter the satellite modem IP address in the Default Gateway eld.
52
ComputersettingsHN9000Satellite Modem UserGuide –
1037577-0001Rev. A
Chapter6