5.Double-click PCI Ethernet Controller.
6.Click the Driver tab and then click Update Driver.
7.Click Display a list of all the drivers, and click Next. Insert the IBM Data Migration User’s Guide and Software CD into the
8.In the Copy manufacture’s files from field, type e:\Drivers\Intel\w9x where e represents the drive letter of the
9.Follow the instructions to install the device drivers. When the adapter is added, it is shown in the Network Adapters list.
10.Click OK in the Select Device window.
11.The Update Wizard displays the message that the device driver has been found. Click Next.
12.Click Finish.
13.Restart your computer when prompted.
14.Proceed to “Connecting the computers” on page
Windows 95
Have your Windows 95 installation CD or diskettes available; you will be prompted for them when you install the new adapter. Follow this procedure to install the Ethernet device drivers in Windows 95:
1.After you install the Ethernet adapter in the computer, start the computer. Windows 95 detects the adapter as a PCI Ethernet device, and the New Hardware Found window opens. Depending on your version of Windows 95 either the Update Device Driver wizard or the New Hardware wizard window opens.
Note: If the New Hardware Found window does not open and Windows 95 starts normally, you might need to manually add the device drivers. Follow the instructions for ″Manually adding the Ethernet device drivers with Windows 95″ on page
2.Insert the IBM Data Migration User’s Guide and Software CD into the
3.Follow the
4.Follow the prompts for any Windows 95 installation disks, and restart the computer when prompted.
5.Proceed to “Connecting the computers” on page
